Robert Shaw 9600 Thermostat User Manual

Return to site

Robert Shaw 9600 Thermostat User Manual

Robertshaw 9600 Thermostat Manual
Robertshaw 9600 Thermostat Troubleshooting
Robert Shaw 9600 Thermostat User Manual 031530
Robert Shaw 9600 Thermostat User Manual
Download Operation & user’s manual of Robertshaw 9600 Thermostat for Free or View it Online on All-Guides.com.

The Robertshaw® Technical Support and Services department is your go to resource for answers to your product questions. Homeworks . For over 20 years, this USA-based team has provided technical answers, documentation, and cross reference information for our customers. ROBERTSHAW 9600 USER MANUAL Pdf Download ManualsLib Installing Item 9600 Thermostat NOTE:FOR NEW INSTALLATIONS, MOUNT THERMOSTAT ON AN INSIDE WALL, 4-5 FEET ABOVE THE FLOOR. DO NOT INSTALL BEHIND A DOOR, IN A CORNER, NEAR AIR VENTS, IN DIRECT SUNLIGHT, OR NEAR ANY HEAT OR STEAM GENERATING FIXTURES.
My thermostat is a Robert Shaw / Maple Chase 9600 and it is showing on the display Err I have pressed the reset button and it will work for about 15 seconds and then go back into Err any suggestion's read more. Robertshaw 9600 Manuals & User Guides User Manuals, Guides and Specifications for your Robertshaw 9600 Thermostat. Database contains 2 Robertshaw 9600 Manuals (available for free online viewing or downloading in PDF): Operation & user’s manual. Robertshaw 9600 Operation & user’s manual (12 pages).
Brand: Robertshaw
Category: Thermostat
Type: Operation & user’s manual 
Model: Robertshaw 9600 , Robertshaw C9600 3 25/15ms. schrolls ela classes.
Live wallpaper for mac. Pages: 12 (1.03 Mb)
Installation Guide
•
Robertshaw 9600 Thermostat ManualAlways turn off power at the main power source by unscrewing
fuse or switching circuit breaker to the off position before installing,
•
Read all of the information in this manual before installing or 
•
This is a 24V AC low voltage thermostat. Do not install on voltages
•
All wiring must conform to local and national building and electrical
•
Do not short (jumper) across terminals on the gas valve or at the
system control to test installation. This will damage the thermostat
5 - 2 Day Programmable
W
R
A
T
INTEGRATED COMFORT SOLUTIONS
DIGITAL 

The Robertshaw® Technical Support and Services department is your go to resource for answers to your product questions. Homeworks . For over 20 years, this USA-based team has provided technical answers, documentation, and cross reference information for our customers. ROBERTSHAW 9600 USER MANUAL Pdf Download ManualsLib Installing Item 9600 Thermostat NOTE:FOR NEW INSTALLATIONS, MOUNT THERMOSTAT ON AN INSIDE WALL, 4-5 FEET ABOVE THE FLOOR. DO NOT INSTALL BEHIND A DOOR, IN A CORNER, NEAR AIR VENTS, IN DIRECT SUNLIGHT, OR NEAR ANY HEAT OR STEAM GENERATING FIXTURES.
My thermostat is a Robert Shaw / Maple Chase 9600 and it is showing on the display Err I have pressed the reset button and it will work for about 15 seconds and then go back into Err any suggestion's read more. Robertshaw 9600 Manuals & User Guides User Manuals, Guides and Specifications for your Robertshaw 9600 Thermostat. Database contains 2 Robertshaw 9600 Manuals (available for free online viewing or downloading in PDF): Operation & user’s manual. Robertshaw 9600 Operation & user’s manual (12 pages).
Brand: Robertshaw
Category: Thermostat
Type: Operation & user’s manual 
Model: Robertshaw 9600 , Robertshaw C9600 3 25/15ms. schrolls ela classes.
Live wallpaper for mac. Pages: 12 (1.03 Mb)
Installation Guide
•
Robertshaw 9600 Thermostat ManualAlways turn off power at the main power source by unscrewing
fuse or switching circuit breaker to the off position before installing,
•
Read all of the information in this manual before installing or 
•
This is a 24V AC low voltage thermostat. Do not install on voltages
•
All wiring must conform to local and national building and electrical
•
Do not short (jumper) across terminals on the gas valve or at the
system control to test installation. This will damage the thermostat
5 - 2 Day Programmable
W
R
A
T
INTEGRATED COMFORT SOLUTIONS
DIGITAL 
THERMOSTAT
User’s Manual 
Installation and 
®
Robertshaw 9600 Thermostat TroubleshootingE
G
Related Products for Robertshaw 9600Related Manuals for Robertshaw 9600Robertshaw 9600: Frequently viewed ManualsIf your Robertshaw Thermostat model is not working correctly, you can perform the troubleshooting process on your own. The guidelines below are presented in the form of tables that describe common thermostat issues, possible causes and solutions of the problems. A wide range of problems is covered stating from the absence of heat and finishing by display malfunctioning. Each manual provides a short description of the troubleshooting process – the guidelines are quite easy to follow. Please, note that while some tasks can be done by an average user, a few repair measures should be done by professionals only.
Robertshaw RS6110 Thermostat TroubleshootingProblemAction
Thermostat does not turn on system.Check wiring 
System turns on too often.Increase temperature differential 
System fan does not operate properly.Move fan option switch to either gas or electric, to match system 
Thermostat does not display proper room temperature.Check F/C (Fahrenheit/Celsius) setting. 
Display Shows HI or LO and room temperature is normal.Call a licensed service person to replace/repair.
Robertshaw Smart Sense Smart 1000 Thermostat TroubleshootingSYMPTOMPOSSIBLE FAULT AND REMEDY
No LCD displayIf the thermostat is battery powered only, remove the battery compartment and check to see that the positive (+) and negative (-) ends of each battery are oriented property. Also make sure that the thermostat is securely attached to the subbase with no exposed gaps.
Thermostat can not be set for auto changeoverInstaller Option 03 needs to be set to 0 to provide Heat/Auto/Cool/Off operation or Heat/Auto/Cool/Emergency Heat/Off for heat pumps.
Temperature display inaccurateAir from wall cavity may be leaking into the rear of the thermostat. Seal hole where wiring enters subbase to prevent air infiltration. External influence from appliances, lighting or drafts may be affecting temperature accuracy. Move lamps or other sources of heat away from thermostat.
Thermostat not displaying outdoor temperatureCheck wiring at outdoor sensor and sensor terminals on subbase. 
Robertshaw Slimzone Premier Thermostat TroubleshootingPROBLEMPOSSIBLE CAUSESOLUTION
No heat/cooling in houseZone thermostat(s)Select heat, cool or auto mode of operation at thermostat
Faulty heating /cooling equipmentTroubleshoot equipment 
Faulty thermostatReplace if necessary.
Faulty zone control panel
No heat/cooling in zoneBalancing damper closedCheck all balancing dampers in the same duct as the motorized zone damper; closed balancing dampers should be readjusted.
Zone registers closedCheck all zone registers; closed registers should be readjusted.
Faulty thermostatReplace if necessary.
Robertshaw 8405 Thermostat TroubleshootingSymptomRemedy
Thermostat does not tum on system.Check wiring 
Thermostat turns system on and off too frequently.Increase temperature differential 
Display is blank, flashing or constant LO BATT.Replace batteries.
System fan does not operate properly.Move Electric/Gas switch to either electric or gas, to match system 
Thermostat does not display proper room temperature.Check F/C (Fahrenheit/Celsius) setting. 
Robert Shaw 9600 Thermostat User Manual 031530Robertshaw RS2210 Thermostat TroubleshootingTROUBLESHOOTING ProblemSolution
SCRAMBLED OR DOUBLE DISPLAY (numbers over numbers)1. Remove clear mylar sticker.
NO DISPLAY1. Check battery connections and batteries.
2. Press the reset button once with a small pm and hold for two seconds then reprogram.
ENTIRE DISPLAY DIMS1. Replace batteries.
AUTO/FAN DOES NOT TURNON1. Move ELEC/GAS selector to opposite position.
2. There may be as much as a 4 minute delay before the heat or cool system turns on. Wait and check. 
3. Check your circuit breakers and switches to ensure there is power to the system.
4. Replace batteries.
5. Make sure your furnace blower door is closed property.
6. If your system only uses 4-wires, be sure the jumper wire is installed between the RC and RH terminals.
7. Check the position of the Furnace or Heat Pump selector switches: Normal/O/B.
ERRATIC DISPLAYPress the reset button once with a small pm and hold for two seconds then reprogram.
IF UNIT CONTINUES TO OPERATE IN THE OFF POSITION1. Replace unit.
THERMOSTAT PERMANENTLY READS E1.E2. E3. E4
Robert Shaw 9600 Thermostat User ManualRobertshaw Thermostat 9420 TroubleshootingSymptomRemedy
Thermostat does not turn on system.Check wiring 
Thermostat turns system on and off too frequently.Increase temperature differential 
Display shows CHECKMonitors system status. Call your local HVAC service provider.
Thermostat does not display proper room temperature.Check F/C (Fahrenheit/Celsius) setting. 

Problem	Action
Thermostat does not turn on system.	Check wiring
System turns on too often.	Increase temperature differential
System fan does not operate properly.	Move fan option switch to either gas or electric, to match system
Thermostat does not display proper room temperature.	Check F/C (Fahrenheit/Celsius) setting.
Display Shows HI or LO and room temperature is normal.	Call a licensed service person to replace/repair.

SYMPTOM	POSSIBLE FAULT AND REMEDY
No LCD display	If the thermostat is battery powered only, remove the battery compartment and check to see that the positive (+) and negative (-) ends of each battery are oriented property. Also make sure that the thermostat is securely attached to the subbase with no exposed gaps.
Thermostat can not be set for auto changeover	Installer Option 03 needs to be set to 0 to provide Heat/Auto/Cool/Off operation or Heat/Auto/Cool/Emergency Heat/Off for heat pumps.
Temperature display inaccurate	Air from wall cavity may be leaking into the rear of the thermostat. Seal hole where wiring enters subbase to prevent air infiltration. External influence from appliances, lighting or drafts may be affecting temperature accuracy. Move lamps or other sources of heat away from thermostat.
Thermostat not displaying outdoor temperature	Check wiring at outdoor sensor and sensor terminals on subbase.

PROBLEM	POSSIBLE CAUSE	SOLUTION
No heat/cooling in house	Zone thermostat(s)	Select heat, cool or auto mode of operation at thermostat
Faulty heating /cooling equipment	Troubleshoot equipment
Faulty thermostat	Replace if necessary.
Faulty zone control panel
No heat/cooling in zone	Balancing damper closed	Check all balancing dampers in the same duct as the motorized zone damper; closed balancing dampers should be readjusted.
Zone registers closed	Check all zone registers; closed registers should be readjusted.
Faulty thermostat	Replace if necessary.

Symptom	Remedy
Thermostat does not tum on system.	Check wiring
Thermostat turns system on and off too frequently.	Increase temperature differential
Display is blank, flashing or constant LO BATT.	Replace batteries.
System fan does not operate properly.	Move Electric/Gas switch to either electric or gas, to match system
Thermostat does not display proper room temperature.	Check F/C (Fahrenheit/Celsius) setting.

TROUBLESHOOTING Problem	Solution
SCRAMBLED OR DOUBLE DISPLAY (numbers over numbers)	1. Remove clear mylar sticker.
NO DISPLAY	1. Check battery connections and batteries.
2. Press the reset button once with a small pm and hold for two seconds then reprogram.
ENTIRE DISPLAY DIMS	1. Replace batteries.
AUTO/FAN DOES NOT TURNON	1. Move ELEC/GAS selector to opposite position.
2. There may be as much as a 4 minute delay before the heat or cool system turns on. Wait and check.
3. Check your circuit breakers and switches to ensure there is power to the system.
4. Replace batteries.
5. Make sure your furnace blower door is closed property.
6. If your system only uses 4-wires, be sure the jumper wire is installed between the RC and RH terminals.
7. Check the position of the Furnace or Heat Pump selector switches: Normal/O/B.
ERRATIC DISPLAY	Press the reset button once with a small pm and hold for two seconds then reprogram.
IF UNIT CONTINUES TO OPERATE IN THE OFF POSITION	1. Replace unit.
THERMOSTAT PERMANENTLY READS E1.E2. E3. E4